端子压接测试报告 Terminal Crimping Report 制造商ManufacturersHRB 送检日期date2014-3-12压接联系人Crimp contacts部门department产品编号Product IDT9910PS-2 线组名Line Group Name原丝编号Strand number16AWG 模具号Die No线型Wire typeUL 3385 检测种类Testing Species 线芯截面端子分析测量系统Terminal Analysis Measurement System 名称Name数值Value标准(范围)Standard结果Result压接高度C/H:Crimp Height 1.8506 mm压接宽度C/W:Crimp Width 3.1088 mm高度/宽度比率(C/H)/(C/W) 59.5270% 55% x 85% OK初始电线面积Initial area 1.3100mm2压接电线面积Crimping area 1.1624mm2截面缩小比Narrow cross-section than 11.2703% 30% x 10% OK压缩比率C/R：Compression Ratio 88.7297% 70% x 90% OK线芯数Cross count0.00 条线压接角度Bending anglex 30.00 Deg 毛刺高度B/H:Burr Height x 1.00*S 毛刺宽度B/W:Burr Width x 0.50*S 基体厚度B/T:Base Thickness x 0.60*S 羽翼尖端间距CFE:Crimp face Ends x 0.50*S 羽翼支承高度LA:Bearing Height x 1.00*S 压接翼与底部高度差F/C:Face End Clearance x 0.50*S 备注Remarks导出 word 报告检测人Detection检测日期Test date2014-3-12注： S 为材料厚度