SPEC NO：B- 10- T- 0237 REV NO: A/1 DATE: MAY/11/2010 PAGE: 1 OF 8 Specification ROHS Client Name： Client P/N： Factory P/N：HL-AA-2810S31YC-D Sending Date： Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation Qualified Unqualified DATE: Adr：West side of Dongfeng Highway,Auto City,Huadu District,Guangzhou,China Tel：020- 86733333（Switchboard） Fax：020- 86733883 86733938 86733265 Web：www.honglitronic.com SPEC NO：B- 10- T- 0237 REV NO: A/1 DATE: MAY/11/2010 PAGE: 2 OF 8 HL- AA- 2810S31YC- D Package Dimensions Notes: 1. All dimension units are millimeters. 2.All dimension tolerance is 0.15mm unless otherwise noted. Recommended Soldering Pattern Features lSide view LED l Wide viewing angle lSuitable for all SMT assembly and solder process lAvailable on tape and reel lMoisture sensitivity level: Level 4 lPackage:3000pcs/reel lRoHS compliant Description The Yellow source color devices are made with AlGaInP on Substrate Light Emitting Diode Applications Optical indicator Backlighting in dashboard and switch Flat backlighting for LCD, symbol and display General use 1112221.20 0.052.45 0.102.80 0.111.00 0.040.55 0.020.55 0.02210.70 0.031.40 0.061.40 0.061.40 0.06SPEC NO：B- 10- T- 0237 REV NO: A/1 DATE: MAY/11/2010 PAGE: 3 OF 8 Selection Guide Electrical / Optical Characteristics at Ta=25C Absolute Maximum Ratings at Ta=25C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Luminous intensity(mcd) 20mA Viewing Angle Rank Min. Max. 21/2 HL- AA- 2810S31YC- D Yellow (AlGaInP ) Water Clear L 160 210 M 210 276 N 276 355 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.the above luminous intensity measurement allowance tolerance 10%. Parameter Symbol Min. Typ. Units Test Conditions Forward Voltage VF 1.8 2.0 V IF=20mA Reverse Current IR - - - - uA VR = 5V Dominate Wavelength d 585 590 nm IF=20mA Max - - 10 - - HL- AA- 2810S31YC- D Parameter Symbol Value Units Power dissipation Pd 75 mW DC Forward Current IF 30 mA Peak Forward Current 1 IFP 140 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Topr - 40 +85 C Storage Temperature Tstg - 40 +100 C SPEC NO：B- 10- T- 0237 REV NO: A/1 DATE: MAY/11/2010 PAGE: 4 OF 8 Relative spectral emission Diagram characteristics of radiation Ambient Temperature VS. Forward Current 0102030405060020406080100Ambient Temperature Ta()Forward Current(mA)0.00.51.01.52.02.53.0-40-20020406080Ambient Temperature Ta()Relative Luminous IntensityForward Voltage VS. Forward Current Ambient Temperature VS. Relative Intensity Forward Current VS. Relative Intensity 0.00.51.01.52.02.501020304050Forward Current(mA)Relative Luminous IntensityTypical optical characteristics curves HL- AA- 2810S31YC- D 0.00.20.40.60.81.0380460540620700780Wavelength(nm)Relative luminous intensity0102030400.00.51.01.52.02.53.0Forward Voltage(V)Forward Current(mA)SPEC NO：B- 10- T- 0237 REV NO: A/1 DATE: MAY/11/2010 PAGE: 5 OF 8 *The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. No. Items Test Condition Test Hours/ Cycles Sample Size Ac/Re 1 Reflow Temp:260max T=10 sec 3 times. 22Pcs. 0/1 2 Temperature Cycle 1005 30 min. 5 min - 405 30 min. 100 Cycles 22Pcs. 0/1 3 Thermal Shock 1005 5 min. - 405 5 min. 100 Cycles 22Pcs. 0/1 4 High Temperature Storage Temp:1005 1000Hrs. 22Pcs. 0/1 5 Low Temperature Storage Temp:- 405 1000Hrs. 22Pcs. 0/1 6 DC Operating Life Ta=255 IF=20mA 1000Hrs. 22Pcs. 0/1 7 High Temperature High Humidity 855/ 85%RH IF=5mA 1000Hrs. 22Pcs. 0/1 Ref. Standard JESD22- B106 JESD22- A104 JESD22- A106 JESD22- A103 JESD22- A119 JESD22- A108 JESD22- A101 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level :90% LTPD :10% HL- AA- 2810S31YC- D SPEC NO：B- 10- T- 0237