资源预览内容
第1页 / 共41页
第2页 / 共41页
第3页 / 共41页
第4页 / 共41页
第5页 / 共41页
第6页 / 共41页
第7页 / 共41页
第8页 / 共41页
第9页 / 共41页
第10页 / 共41页
亲,该文档总共41页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述
CENTRAL SOUTH UNIVERSITY本科生毕业论文本科生毕业论文题 目PID温控系统的设计及仿真学生姓名指导教师学 院信息科学与工程学院专业班级完成时间年 月I摘 要温度是工业控制的主要被控参数之一。可是由于温度自身的一些特点,如惯性大,滞后现象严重,难以建立精确的数学模型等,给控制过程带来了难题。要对温度进行控制,有很多方案可选。PID 控制简单且容易实现,在大多数情况下能满足性能要求。模糊控制的鲁棒性好,无需知道被控对象的数学模型,且在快速性方面有着自己的优势。研究分析了 PID 控制和模糊控制的优缺点,把两者相互结合,采用了用模糊规则整定、两个参数的模糊自整定 PID 控制方法。本PKIK研究以电烤箱为控制对象,用 MATLAB 软件对 PID 控制、模糊控制和参数模糊自整定 PID 控制的控制性能分别进行了仿真研究。仿真结果表明 PID 对于对象模型复杂和模型难以确定的控制系统具有很大的局限性,不能满足调节时间短、超调小的技术要求。由于模糊控制的理论(如量化因子和比例因子的确定问题)并不完善,其可能获得的控制性能无法把握,而且模糊控制易受模糊规则有限等级的限制而引起稳态误差。参数模糊自整定 PID 控制吸收前两种方法的长处,满足了调节时间短、超调量为零且稳态误差较小的控制要求。因此本论文最终确定采用参数模糊自整定PID 控制方案。本系统硬件采用了以 AT89C52 单片机为核心的温度控制器,选用 k 型热电偶为温度传感器结合 MAX6675 芯片构成前向通道,同时双向晶闸管和 SSR 构成后向通道,由按键、LED 数码显示器及报警单元等组成人机联系电路。关键词关键词:单片机,PID,模糊控制,仿真IIABSTRACTTemperature is one of the main parameters in the industrial process control. Yet there are difficulties to have a good control of temperature because of the characteristics of the temperature itself: the temperature inertia is great, its time-lag is serious and it is hard to establish an accurate mathematical model.There are many methods to be selected in order to control a system. The PID control is simple, easily realized and in most cases it meets the control demand. Fuzzy control has the advantage of quickness, its robustness is good and there is no need to know the objects mathematical model. This paper analyses the advantages and disadvantages of both PID control and fuzzy control and comes to the method of combining them together, fuzzy self-tuning PID control. In this method, and of the PID controller are PKIKadjusted by fuzzy control rulesIn the paper simulations of PID control, fuzzy control and fuzzy self-tuning PID control are done by MATLAB to control a electric oven. Conclusions are that for those control objects of which models are complicated or hard to establish, the PID method has limitation and doesnt meet the control demand. As the fuzzy control method theory is not perfect, a good control performance cannot be expected. And it could easily cause the steady-state error for it is restricted by limited grades of the fuzzy rules. Finally the fuzzy self-tuning PID control method is selected, since it meets the control demands.In this paper AT89C52 is used as controller, toward access is composed of K which is used as the temperature sensor and MAX6675. Backward access is composed of bidirectional thyristor and SSR. Man-machine circuit is composed of keyboard, LED and warning unit, etc.Key words:Micro Controller, PID Control, Fuzzy Control, SimulationIII目 录摘 要.IABSTRACT.II第一章绪论 .11.1 课题的提出及意义.11.2 控制系统背景介绍.11.3 当代温控系统及智能算法.2第二章温控系统的设计 .52.1 温控系统的总体设计.52.1.1 温控系统设计的基本原则.52.1.2 温控系统的结构及设计.62.2 温控系统的硬件设计.72.2.1 前向通道设计.72.2.2 后向通道设计.102.2.3 人机通道设计.11小 结.15第三章系统控制方案 .163.1 PID 控制 .163.1.1 PID 的概述 .163.1.2 PID 控制的基本理论及特点 .163.2 模糊控制.183.2.1 模糊控制的概述.183.2.2 模糊控制的基本原理及特点.183.3 模糊 PID 控制 .
网站客服QQ:2055934822
金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号