2002, Cisco Systems, Inc. All rights reserved. 2002, Cisco Systems, Inc. All rights reserved.2Managing Your Network EnvironmentModule 2 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-3ObjectivesUpon completing this module, you will be able to: Use the command-line interface to accurately determine network operational status and network performance Manage operating system image files to maintain an accessible operating system file and according to best practices, given a network topology Use Cisco IOS commands to manage device configuration files to reduce device downtime and according to best practices Execute an add, move, or change so that the network functions in accordance with the new requirement, given a new network requirement 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-4 2002, Cisco Systems, Inc. All rights reserved.4Discovering Neighbors on the Network 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-5ObjectivesUpon completing this lesson, you will be able to: Determine the host names and addresses of neighboring Cisco devices using CDP, given operational access layer switches and routers Use information gathered using CDP to create a network map of the environment, given operational access layer switches and routers 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-6Cisco Discovery Protocol CDP is a proprietary utility that gives you a summary of directly connected switches, routers, and other Cisco devices. CDP discovers neighboring devices regardless of which protocol suite they are running. Physical media must support the Subnetwork Access Protocol (SNAP) encapsulation. 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-7Discovering Neighbors with CDP CDP runs on routers with Cisco IOS software Release 10.3 or later and on Cisco switches and hubs. Summary information includes:Device identifiersAddress listPort identifierCapabilities listPlatform 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-8Using CDP 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-9Using the show cdp neighbors Command 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-10Using the show cdp entry Command 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-11Additional CDP Commands 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-12Creating a Network Map 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-13Summary Cisco Discovery Protocol is an information- gathering tool used by network administrators to get information about directly connected devices. CDP exchanges hardware and software device information with its directly connected CDP neighbors. You can enable or disable CDP on a router as a whole or on a port-by-port basis. 2002, Cisco Systems, Inc. All rights reserved.ICND v2.02-14Summary (Cont.) The show cdp neighbors command displays information about a routers CDP neighbors. The show cdp entry, show cdp traffic, and show cdp interface commands display detailed CDP information on a Cisco device. After you use CDP to discover the devices on the internetwork, you should document the network so you understand and can support the network.