35Maintenance Book03 THREAD TRIMMER TIME ?3-1 The Moving Section of the Mes Setting?區間?1) Fig. 1 .Lay down the sewing machine toward the bed hinge and loosen the screw(2EA) of the stopper for thread trimming drive crank.?机?沽桔?机，?汽緊?驅?曲?固 ?。Fig. 2Fig. 12) Fig. 2 0.5mm .Move the stopper for thread trimming drive crank in the direction of the arrow and set the distance between the end of the thread trimming drive crank and the end of mes bracket at 0.5mm. ?驅?曲?，?驅?曲? 架?間距?0.5mm。Fig. 33) Fig. 3 0.5mm .Make sure that the end of the thread trimming drive crank is located at 0.5mm inside of the end of the mes bracket.?驅?曲?架?內?0.5mm ?。Mhttp:/www.taida58.com http:/www.taida58.cnKM-2070 Series364) Fig. 4 .Tighten the screw(2EA) of the stopper for thread trimming drive crank .汽緊?驅?曲?固?。Fig. 4M