Copyright DASSAULT SYSTEMES 2002,1,Part Design Advanced,CATIA Training Foils for Instructor,Version 5 Release 9 June 2002 EDU-CAT-E-PDG-AI-V5R9,Copyright DASSAULT SYSTEMES 2002,2,Course Presentation,Objectives of the course In this course you will complete the knowledge acquired in the CATIA Part Design Fundamentals course Targeted audience New CATIA V5 users Prerequisites CATIA Part Design Fundamentals course,0.5 day,Copyright DASSAULT SYSTEMES 2002,3,Table Of Contents (1/2),Sketch-Based Features p.5 3D Wireframe Elements p.6 Holes/Pockets/Pads Not Normal to Sketch Plane p.7 Creating Pads and Pockets from Surfaces p.8 Creating Grooves p.10 Creating Ribs and Slots p.15 Creating Stiffeners p.20 Creating Lofts p.22 Creating Simple Loft p.23 Remove Lofts p.25 Coupling p.26 Dressing-Up Features p.29 Thickness p.30 Advanced Draft p.32 Surface-Based Features p.37 Surface-Based Features p.38 3D Constraints p.42 3D Constraints p.43,Copyright DASSAULT SYSTEMES 2002,4,Table Of Contents (2/2),Using Transformations p.45 Using Transformations p.46 Part Management p.49 Measure, Scan, Parent-Children p.50 Cut, Paste, Isolate, Break p.53 Inserting and Managing Bodies p.56 Multi-Model Links p.64 Sketch Selection with Multi-Documents Links p.65 Scaling p.66 Customizing Local Axis p.67 Customizing Local axis p.68 Tools p.71 Analyzing Threads and Taps p.72 Draft Analysis p.74 Curvature Analysis p.78,Copyright DASSAULT SYSTEMES 2002,5,Sketch-Based Features,You will learn more about 3D Wireframe Elements and how to use them to help construct a Part and you will also learn tools to create other types of Sketch-Based Features and how to extrude some of them along user-defined directions. You will see other Sketch Based features 3D Wireframe Elements Holes/Pockets/Pads not Normal to Sketch Plane Creating Pads and Pockets from Surfaces Creating Grooves Creating Ribs and Slots Creating Stiffeners,Copyright DASSAULT SYSTEMES 2002,6,3D Wireframe Elements,You can create points in space,Create the 3D curve by using the Curve in Space tool from the Free-Style Workbench,Copyright DASSAULT SYSTEMES 2002,7,Holes/Pockets/Pads Not Normal to the Sketch Plane,Copyright DASSAULT SYSTEMES 2002,8,Creating Pads and Pockets From Surfaces (1/2),With the command below, you will be able to extrude Surfaces in any Direction. Note that the scenario shows you how to create Pads from surfaces, but the method can also be applied to Pockets.,Up to Plane,Up to Last,Up to next,Pocket from a Surface (Up to Plane),Copyright DASSAULT SYSTEMES 2002,9,Creating Pads and Pockets From Surfaces (2/2),Copyright DASSAULT SYSTEMES 2002,10,Creating Grooves (1/5),If the Sketch used as the profile contains an axis you do not have to select an axis in the 3D space,Copyright DASSAULT SYSTEMES 2002,11,Creating Grooves (2/5),The Reverse Side button applies to open profiles only. This option lets you choose which side of the profile is to be extruded,Select the Groove icon,1,Select the open sketch,2,Modify the Groove Limit Angles,3,Select the arrow to reverse the groove side (or click the Reverse Side button in the dialog box),4,Select OK in the dialog box,5,You get:,Copyright DASSAULT SYSTEMES 2002,12,Creating Grooves (3/5),If no sketch has been created when activating the Groove icon, you can access to Sketcher by selecting the Sketcher icon. When you have completed the sketch, you can leave the Sketcher then you will return to the Pad Groove creation,Select the Sketcher icon in the dialog box,Copyright DASSAULT SYSTEMES 2002,13,Creating Grooves (4/5),You can use sub-element of a sketch to create Grooves,Copyright DASSAULT SYSTEMES 2002,14,Creating Grooves (5/5),You can now create Grooves from sketches including several closed profiles. These profile must not intersect,Copyright DASSAULT SYSTEMES 2002,15,Creating Ribs and Slots (1/5),Slot has the same behavior but removes material,Copyright DASSAULT SYSTEMES 2002,16,Creating Ribs and Slots (2/5),Slot has the same behavior but removes material,Copyright DASSAULT SYSTEMES 2002,17,Creating Ribs and Slots (3/5),Select the Sketcher icon in the dialog box,Copyright DASSAULT SYSTEMES 2002,18,Creating Ribs and Slots (4/5),You can use sub-element of a sketch to create Ribs or Slots,Copyright DASSAULT SYSTEMES 2002,19,Creating Ribs and Slots (5/5),You can now create Ribs and Slots from sketches including several closed profiles. These profiles must not intersect,Rib,Slot,Copyright DASSAULT SYSTEMES 2002,20,Creating Stiffeners (1/2),You can use sub-element of a sketch to create a Stiffener,Copyright DASSAULT SYSTEMES 2002,21,Creating Stiffeners (2/2),Copyright DASSAULT SYSTEMES 2002,22,Creating Lofts,You will learn how to create Lofts and Removed Lofts Creating a Simple Loft Remove Lofts Coupling,Copyright DASSAULT SYSTEMES 2002,23,Creating a Simple Loft (1/2),Sections, Guides and Spine,Copyright DASSAULT