英国焊接标准(BS welding standards)ANSI| BS| DIN| EN| GB| ISO| JIS| NF| DIC 编号中文名称英文名称BS 1722-10-2006 栅栏.链节和焊接筛网的防盗栅栏用规范 Fences - Specification for anti-intruder fences in chain link and welded mesh BS 1894-1992 焊接结构的电热锅炉的设计和制造规范 Specification for design and manufacture of electric boilers of welded construction BS 2790-1992 焊接结构的壳式锅炉的设计和制造规范 Specification for design and manufacture of shell boilers of welded construction BS 2S 510-1970 碳钢薄板和带材规范(430/540 MPa)(适用于焊接) Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding) BS 2S 511-1970 深拉碳钢薄钢板和带材的规范(280/400 MPa)(适用于焊接) Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding) BS 2S 514-1969 碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) BS 2S 515-1969 碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) BS 2S 92-1964 飞机材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸) Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) BS 2T 66-1980 19/10铬-镍耐腐蚀钢管材规范(铌稳定的:550MPa)(可焊接) Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) BS 2T 68-1980 冷拉18/10铬-镍耐腐蚀钢管材规范(铌稳定的:800MPa)(可焊接) Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) BS 3604-2-1991 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes BS 3799-1974 石油工业用钢管配件、螺旋管接头和套管焊接规范 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry BS 3T 53-1980 铬-钼钢管材规范(700MPa)(管外径不小于12.5mm)(可焊接) Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) BS 4129-1990 板材钢电阻焊用焊接底剂、焊透密封剂、粘合剂和蜡规范 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel BS 4449-2005+A2-2009 混凝土增强钢.可焊接增强钢.棒材、卷材和拆卷产品.规范 Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification BS 4515-1-2009 陆地和近海钢管焊接规范.碳和碳锰钢管 Specification for welding ofsteel pipelines on land andoffshorePart 1: Carbon and carbon manganesesteel pipelines BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials BS 4872-1-1982 不要求批准焊接程序的焊工考试规范.第1部分:钢熔焊 Specification for approval testing of welders when welding procedure approval is not required - Fusion welding of steel BS 4872-2-1976 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys BS 499-1 Supplement-1992 焊接术语与符号.补充.电焊设备的定义 Welding terms and symbols - Supplement - Definitions for electric welding equipment BS 499-1-2009 焊接术语和符号.焊接、钎焊和热切割用术语表 Welding terms and symbolsPart 1: Glossary for welding, brazing andthermal cutting BS 499-2C-1999 焊接术语与符号.图表形式的的欧洲电弧焊符号 Welding terms and symbols - European arc welding symbols in chart form BS 4T 45-1972 碳-锰钢管材规格(700 N/mm)(管外径大于或等于12.5mm)(可焊接) Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) BS 5950-2-2001 建筑物中结构用的钢制件.材料、制造和装配规范.轧制及焊接型材 Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections BS 5S 21-1964 飞机材料规范.20号碳钢(适用于焊接)(25/35吨力/平方英寸:最大直径或最小断面尺寸6英寸) Specification for aircraft material - 20 carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension) BS 638-4-1996 电弧焊电源、设备和附件.第4部分:焊接电缆规范 Arc welding power sources, equipment and accessories - Specification for welding cables BS 6942-2-1989 氧燃料气体焊接和相关工艺用成套小型工具的设计和建造.第2部分:使用可充氧气和燃气容器的成套工具规范 Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas BS 6990-1989 含有工艺流体或其残留物的钢管焊接实用规程 Code of practice for welding on steel pipes containing process fluids or their residuals BS 7122-1989 液化气体道路运输用的焊接钢槽车规范 Specification for welded steel tanks for the road transport of liquef