8th Division编号：AL-18-GC-受控状态：文件受控发行须于此加盖受控标识印章，无受控标识原始印章者，为非受控版本！版本：A修改号：0诺基亚QS机种手机产品 外观检验规范页码：第 13 页 共 13 页受控号：1 目的Purpose规范诺基亚手机产品的外观检验标准，制定诺基亚手机产品的外观检验之缺陷判定基准，使生产者、检验员或相关人员能正确、更快地掌握产品的检验标准，确保产品品质，满足客户要求。Define cosmetic criteria of Nokia mobile phone product, Define defect determining baseline of Nokia mobile phone product cosmetic inspection, let producer, inspector can understand product inspection criteria correctly and quickly. To ensure product quality, satisfy customers requirement.2 适用范围：Application适用于BYD第八事业部 诺基亚QS机种B-Cover 及C-cover产品的外观检验.Apply to cosmetic inspection for Nokia QS B-Cover and C-Cover product at Division 8th.3 参考文件：ReferenceAL-18-G-0007 MOSS 800/1 - Visual Quality of Mechanics 机构件外观品质标准AL-18-G-0006 MOSS 800/2 - Quality Standard of Painted Parts 喷漆件品质标准AL-18-G-0008 MOSS 800/4 - Quality Standard for Aluminium and Magnesium Die Casting 铝镁压铸产品品质标准AL-18-G-0010 MOSS 800/7 - Quality Standard for Injection Molded Plastic Parts 注塑塑胶产品品质标准 SY B/C-Cover 3D喷漆图面4 定义 Definition 4.1 缺陷定义: Defect Definition:4.1.1 严重缺陷：凡制品有危及使用者或生产者生命安全之缺陷，谓之严重缺陷。 Serious defect: Product defect jeopardize user or producers life & security. 4.1.2 主要缺陷：此缺陷会降低其功能或实用性质达不到所预期之目标，谓之主要缺陷。 Major defect: Defect reduces product function or used effect, can not meet expected objective.4.1.3 次要缺陷：不影响产品使用目的及功能，而仅为瑕疵者，此缺点谓之次要缺陷，亦称轻微缺陷。 Minor Defect: Defect doesnt influence product function or used effect, just a blemish. 4.2 级面规定: Class definition:4.2.1 I 级面： 组装后的外露面，例如：视窗、外壳表面 Class I : Surfaces which are visible in the fully assembled. E.g. Windows, Outside surfaces of covers. 4.2.2 II级面： 组装后不能直接看到的次要面，但需要好的品质 Class II : Surfaces which are not visible in normal use but require good visual quality 4.2.3 III级面：内部表面，此面客户始终不可看见，不需要非常好的品质 Class III : Inner Surfaces which are never visible to customer in final product and do not require good visual quality表示：银色喷漆面， I 级面 Means: Silver Painted Class I表示：银色喷漆面, II 级面 Means: Silver Painted Class II 表示：黑色喷漆面， I 级面 Means: Black Painted Class I 表示：黑色喷漆面, II 级面 Means: Black painted Class II. 表示：灰色可溢漆区域III级面 Means: Class III areas, Overspray allowedSY B COVER灰色区域为三级面，允许溢漆。Gray area is class III overspray allowed一级面Class I灰色区域为三级面，允许溢漆。Gray area is class III overspray allowed二级面Class II Hinge 内侧区域不允许溢漆。Orange area overspray cant allowed 两边卡钩允许溢漆Both side of hook overspray allowedSY C-Cover一级面Class I二级面Class II三级面允许溢漆class III overspray allowed 一级面Class IPaint burr allowed以上图示灰色区域为三级面，允许溢漆。以上图示灰色区域为三级面，允许溢漆。 SY Hinge-lidI级面Class III级面 Class IIIII级面Class III4.3 检验条件: Inspection Conditions4.3.1 检验人员 : 裸眼视力1.0或1.0以上 Inspector: Eyesight for naked eyes is 1.04.3.2 照明条件: 照明度要求1000200Lux），且要求避免其他光源干扰 illumination requirement: 1000200Lux, prevent interfered by other illuminant 光源类型：D65-标准发光体，类似光源也可以用于检验，但必须经过Nokia认可 Light Type : D65 CIE Standard illumination. Similar light type can be used, but only after agreement by Nokia.4.3.3 检验角度: 目光垂直于检验产品的检验区域 Inspection angle: vision is perpendicular to inspection area of product4.3.4 检验距离和目视时间：Inspection distance and visual time表面 Surface观察距离 Inspection distance 观察间隔 Inspection interval I，II，III30 cm 5cm 每个面观察105秒钟 Each surface inspect 105s4.3.5 无法判定检验区域是否为外观区域时，用实配件进行评估 If can not determine whether it is cosmetic area, evaluate by matching.5 职责 Responsibility5.1 品质部门负责此文件的更新及维护。 QE: maintain and update this document. 5.2 制程QC及生产部门依据此文件进行诺基亚产品外观品质管控。 Process QC/Manufacture department: according to this criteria control Nokia product cosmetic quality. 5.3 此文件依据诺基亚客户的正式文件进行转换, 在没有预先签署保密协议的条件下, 任何个人不得告知,分发给诺基亚以外的个人或团体。 This document transformed according to Nokia copyright document, without prior written secrecy agreement, any one can not disclose/distribute it to any one or organization except Nokia. 6 缺陷分类 Defect classify 6.1 缺陷定义 Defect definition压铸缺陷：Die casting defects 飞边（flash）:在分模线处产生的多余材料 the part has excessive material at the tooling split line.分模线不匹配（Split line miss-matches）：在产品分模线处存在段差a step or burr occurs along the part line.外形错误（Form errors）: 产品轮廓特征不符合标准the form of the part is not as specified.缺料 (miss material) : 产品射料不足 the part has short shot.凹陷（sinks）: 在产品表面有下凹痕迹 a moderate dent on the surface of a part.水泡（Blister）:表面可见的气泡 visible bubble (complete or burst) on the surface.裂痕(crack)：产品素材内部或表面开裂 cracks in / on the part.顶针印（Mark by ejector pins）：产品表面小凸起 circular depres