NOTE : All Specifications subject to change without notice. 0 CONTENTS I- OVERVIEW COMPANY PROFILE P.1 FUZETEC PRODUCT FAMILY P.1 SAFETY, QUALITY AND CUSTOMER SATISFACTION P.1 TECHNOLOGY NICHE P.1 II- FUNDAMENTAL HOW DOES THE RESETTABLE FUSE WORK P.2 TRIP CURRENT, HOLD CURRENT AND THERMAL DERATING P.2 III- PRODUCT PRODUCT SUMMARY P.3-P.4 FRX P.5-P.7 FRX90V P.8-P.10 FBR P.11-P.13 FRU P.14-P.16 FRT P.17-P.19 FUSB P.20-P.22 FRG P.23-P.25 FHT P.26-P.28 FRHV P.29-P.32 FRH P.33-P.35 FRVL P.36-P.39 FRV P.40-P.42 FRA (Obsolete) P.43-P.45 FSMD2920 P.46-P.48 FSMD1812 P.49-P.51 FSMD1210 P.52-P.54 FSMD1206 P.55-P.57 FSMD0805 P.58-P.60 FSR P.61-P.63 FLR P.64-P.66 FLT P.67-P.69 FVT P.70-P.72 FVL P.73-P.75 FSL P.76-P.78 IV APPENDIX CROSS REFERENCE P.79-P.83 THERMAL DERATING P.84 APPLICATION AND INDUSTRY P.85 SMD PRODUCT SOLDER REFLOW RECOMMENDATIONS P.86 QUICK SELECTION GUIDE P.87 NOTE : All Specifications subject to change without notice. 2 HOW DOES THE RESETTABLE FUSE WORK FUZETEC resettable fuses are designed and made of patented novel polymeric PTC material in thin chip form, developed solely by FUZETEC . With electrodes and leads attached on both sides, it is placed in series to protect a circuit. At “normal operating condition” the device remains at an extremely low resistance (milli-ohms) and allows the electrical current to flow through it without any restriction. When overcurrent conditions occur, the polymeric PTC material heats up and its resistance increases sharply. Such a sharp resistance increase (to an insulated status) cuts off the current in the circuit, and consequently protects the element and device in the circuit. Upon fault current being removed, the resettable fuse cools and its resistance drops to the original extremely low value. The resettable fuse is “reset” and allows the current through the circuit again. TRIP CURRENT, HOLD CURRENT AND THERMAL DERATING Trip Current (IT) and Hold Current (IH) of FUZETEC resettable fuse are rated at 23. Typically its Trip Current is twice as much as its Hold Current. FUZETEC device does not trip at or below its rated Hold Current, and will trip at or above its Trip Current value. However, due to PTC effect both IT and IH reduce with ambient temperature increase and vice versa. As shown bellow, the currents are reduced nearly 50% at 85 and increased to 150% at -40. II - FUNDAMENTAL Hold FRH180-250F B= All other FRH devices NOTE : All Specifications subject to change without notice. 35 0.01 0.1 1 10 100 1000 00.20.40.60.811.21.41.61.822.22.42.62.83 Time-to-trip (S) Fault current (A) G F E D C B A III - Product - Radial Leaded PTC Typical Time-To-Trip at 23 Part Numbering System Part Marking System Example * FRH150-600F Marking: RH6150F * FRH160-600F Marking: RH6160F Standard Package Warning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. -PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. -Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. P/N Pcs /Bag Reel/Tape P/N Pcs /Bag Reel/Tape FRH080-250UF 300 1.5K FRH145-250UF 300 1.5K FRH080-250F 300 1.5K FRH145-250F 300 1.5K FRH110-250UF 300 1.5K FRH180-250UF 200 1.2K FRH110-250F 300 1.5K FRH180-250F 200 1.2K FRH120-250UF 300 1.5K FRH150-600F 100 600 FRH120-250F 300 1.5K FRH160-600F 100 600 A= FRH080-250(U)F B= FRH110-250(U)F C= FRH120-250(U)F D= FRH145-250(U)F E= FRH180-250(U)F F= FRH150-600F G= FRH160-600F F Fuzetec Logo RH F RoHS Compliant/ Lead Free Part Identification Product Family Date Code/Lot Number F RH110F 89AH F R H U F RoHS Compliant/ Lead Free Unencapsulated part Maximum interrupt Voltage Rating Current Rating NOTE : All Specifications subject to change without notice. 36 III - Product - Radial Leaded PTC FRVL Series Electrical Characteristics (23) Resistance Tolerance Hold Current Trip Current Max.Time to Trip Max. Current Max. Oper. Voltage Max. Int. Voltage Typical Power RMIN R1MAX Part Number IH, A IT, A at 5xIH,s IMAX, A VMAX, VAC/DC VI-MAX,VAC/DC Pd, W Ohms Ohms FRVL010-120F 0.10 0.20 10.0 2.0 120 135 0.84 3.00 7.50 FRVL017-120F 0.17 0.34 10.0 2.0 120 135 0.84 2.00 7.00 FRVL020-120F 0.20 0.40 9.0 2.0 120 135 1.08 1.83 4.40 FRVL025-120F 0.25 0.50 7.5 3.0 120 135 1.08 1.25 3.00 FRVL030-120F 0.30 0.60 8.5 3.0 120 135 1.44 0.88 2.10 FRVL040-120F 0.40 0.80 6.5 3.0 120 135 1.44 0.55 1.29 FRVL050-120F 0.50 1.00 6.0 3.0 120 135 1.56 0.50 1.17 FRVL065-120F 0.65 1.30 5.7 5.0 120 135 1.68 0.31 0.72 FRVL070-120F 0.75 1.50 6.3 5.0 120 135 1.80 0.25 0.60 FRVL075-120F 0.75 1.50 15.0 7.5 120 135 2.64 0.25 0.69 FRVL090-120F 0.90 1.80 7.2 5.0 120 135 1.80 0.20 0.47 FRVL100-120F 1.00 2.00 15.0 10.0 120 135 2.64 0.18 0.47 FRVL110-120F 1.10 2.20 8.2 8.0 120 135 2.28 0.15 0.38 FRVL125-120F 1.25 2.50 20.0 12