SD5 操作指南 0-1 用户手册入门指南用户手册入门指南 结合 SD 系列软件阅读参考 用户手册 C 版本对应控台 2.0.680 SD5 操作指南 0-2 Copyright 2014 Digico UK Ltd All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Digico UK Ltd. Information in this manual is subject to change without notice, and does not represent a commitment on the part of the vendor. Digico UK Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. All repair and service of the SD5 product should be undertaken by Digico UK Ltd or its authorised agents. Digico UK Ltd cannot accept any liability whatsoever for any loss or damage caused by service, maintenance, or repair by unauthorised personnel. Software License Notice Your license agreement with Digico UK Ltd, which is included with the SD5 product, specifies the permitted and prohibited uses of the product. Any unauthorised duplication or use of Digico UK Ltd software, in whole or in part, in print or in any other storage and retrieval system is prohibited. Licenses and Trademarks The SD5 logo and SD5 name are trademarks, and Digico UK Ltd and the Digico UK Ltd logo are registered trademarks of Digico UK Ltd. Microsoft is a registered trademark and Windows is a trademark of Microsoft Corp. Digico (UK) Ltd Unit 10 Silverglade Business Park Leatherhead Road Chessington Surrey KT9 2QL England Telephone: +44 (0)1372 845600 Fax: +44 (0)1372 845656 Email: salesdigiconsoles.com WWW: http:/www.digico.biz Manual Issue and Date: Issue C - April 2014 - For Version 2.0.680+ Software Licence Agreement “Product“: SD5 software product produced by Digico UK Ltd intended for use on Target Platform identified below. “Target Platform“: Digico SD5 Digital Console system. In return for the payment of the one-time fee, the Customer (identified at the end of this Agreement) receives from Digico UK Ltd a licence to use the Product subject to the following terms and conditions. 1. The Product may be used without time limit by the Customer on the Target Platform. 2. The Customer must register the Product with Digico UK Ltd. Registering the Product is deemed an acceptance of the terms and conditions in this agreement. 3. The Product and its licence are not transferable, and the Customer is not permitted to onward-license to any third party. The Cus- tomer indemnifies Digico UK Ltd against any and all claims and actions arising from third party use of copies of the Product made by the Customer. 4. The Customer agrees not to attempt to decompile the object code of the Product otherwise than in circumstances specifically provided for by law, and then only after consultation with Digico UK Ltd. 5. The Customer agrees not to use, or licence the Product for use, with equipment other than the Target Platform. 6. The Customer agrees not to modify the Product without the prior written consent of Digico UK Ltd. 7. This Agreement applies to any enhancement or upgrades that may become available for the Product. 8. This Agreement does not transfer any right, title, or interest in the Product to Customer except as specifically set forth herein. 9. Digico UK Ltd reserves the right to terminate this Agreement upon breach, in which event Customer shall thereafter only be authorised to use the Product to the extent that its contractual commitments to third parties require and then only where such commitments relate to use of the Product as authorised in the foregoing provisions of the Agreement. LIMITED WARRANTY - Digico UK Ltd warrants for a period of 1 year from the date of purchase of the Product, the Product will reason- ably execute its programming instructions when properly installed on the Target Platform. In the event that this Product fails to execute its programming instructions during the warranty period, the Customers remedy shall be to return the Product to Digico UK Ltd for replace- ment or repair at Digico UK Ltd option. Digico UK Ltd makes no other express warranty, whether written or oral with respect of this Product. LIMITATION OF LIABILITY - Except as otherwise expressly provided by law, (a) the remedies provided above are the Customers sole and exclusive remedies and (b) Digico UK Ltd shall not be liable for any direct, indirect, special, incidental, or consequential damages (including lost profit whether based on warranty, contract, tort, or any other legal theory.) This agreement is made under the Laws of England. LICENCE NO: . REGISTRATION DATE: . SD5 操作手册 0-3 目录 1.1 控台控台概述概述.1-1 1.2 手册概述手册概述1-1 1.3 开始前必读开始前必读1-2 1.3.1 工作界面布局工作界面布局1-2 1.3.2 推子层和推子页推子层和推子页.1-3 1.3.3 控制面板应用控制面板应用.1-3 1.3.4 指派通道指派通道.1-4 1.3.5 主推子主推子.1-6 1.3.6 通道类型通道类型1-6 1.4 硬件配置硬件配置1-7 1.4.1 连接方式连接方式.1-7 1.5 软件配置软件配置1-8 1.5.1 模板模板1-8 1.5.2 工程文件构成工程文件构成概述概述.1-8 1.5.3 音频接口界面音频接口界面.1-9 1.5.4 Opto V220 (DiGiRacks) and Opto V221 (SD Racks) 1-10