摩托罗拉BSS系统维护-日常维护操作简介 1摩托罗拉BSS系统维护OMC(命令)主要内容主要内容一一. .通用人机命令介绍通用人机命令介绍二二. .BSSBSS状态检查命令状态检查命令三三. .BSSBSS配置查看命令配置查看命令四四. .BSSBSS( (参数参数) )操作命操作命令令五五. .OMCOMC性能统计数据性能统计数据采集采集六六. .日常维护检查事项日常维护检查事项2摩托罗拉BSS系统维护OMC(命令)一.通用人机命令1. 改变操作员的命令级别: chg_level 命令MMI-RAM 0115 - chg_lEnter password for security level you wish to access:Current security level is 2v直接回车即进入2级；若打错密码则继续在1级状态。3摩托罗拉BSS系统维护OMC(命令) 2. 查看当前级别下可用的命令: helpMMI-RAM 0118 - helpCommands available:! # add_cell add_neighbor add_rtf_path alias assess cage_audit cell_name chg_a5_alg_pr chg_act_alg_data chg_audit_sched chg_cell_element chg_cell_id chg_csfp chg_dte chg_eas_alarm chg_eas_report chg_element chg_hop_params chg_ksw_config chg_level chg_password chg_rtf_freq chg_severity chg_smscb_msg chg_stat_prop chg_throttle chg_time chg_ts_usage chg_x25config clear_cal_data clear_gclk_avgs clear_stats copy_cell copy_path del_act_alarm del_cell del_neighbor del_rtf_path del_smscb_msg device_audit disable_alarm disp_a5_alg_pr disp_act_alarm disp_alarm_sites disp_bss disp_cal_data disp_cbch_state disp_cell disp_cell_status disp_csfp disp_csfp_status disp_dte disp_element disp_enable_stat disp_equipment disp_flash disp_gclk_avgs disp_gclk_cal disp_gsm_cells disp_hdlc disp_hopping disp_interval disp_level disp_link_usage disp_mms_ts_usage disp_neighbor disp_options disp_processor disp_relay_contact disp_rtf_channel disp_rtf_path disp_severity disp_site disp_stat_prop.4摩托罗拉BSS系统维护OMC(命令)3. 查看某条具体命令的功能、格式和操作等级: manMMI-RAM 0118 - man equip Command: equip Function: Equips the specified device or function. Additional information is prompted. Security Level: 2Sysgen Mode: Can be executed in or out of sysgen mode. bsc or 0 Specifies the BSC. 1 to 120 Specifies a BTS. Literal that uniquely identifies the device/function. Example 1: Equip a GPROC at the BSC equip 0 GPROC5摩托罗拉BSS系统维护OMC(命令)二二. .BSSBSS状态检查命令状态检查命令BSC状态检查命令XCDR状态检查令BTS工作状态命令6摩托罗拉BSS系统维护OMC(命令)BSC状态检查命令1.1.查看查看C7C7信令链路信令链路MTLMTL工作状态工作状态: :MMI-RAM 0115 - state 0 mtl * *DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function- - - - -MTL 0 0 0 B-U NO REASON 30/06 18:55:31 NoneMTL 1 0 0 B-U NO REASON 30/06 18:55:34 NoneMTL 2 0 0 B-U NO REASON 30/06 18:55:48 NoneMTL 3 0 0 B-U NO REASON 30/06 18:55:51 NoneMTL 4 0 0 B-U NO REASON 30/06 18:55:40 NoneMTL 5 0 0 B-U NO REASON 30/06 18:55:43 NoneMTL 6 0 0 B-U NO REASON 30/06 18:55:52 NoneMTL 7 0 0 B-U NO REASON 30/06 18:55:54 NoneMTL 8 0 0 B-U NO REASON 30/06 18:55:45 NoneMTL 9 0 0 B-U NO REASON 30/06 18:55:53 NoneMTL 10 0 0 B-U NO REASON 30/06 18:55:53 None END OF STATUS REPORT7摩托罗拉BSS系统维护OMC(命令)2. 2. 检查所有检查所有2 2M M接口的状态接口的状态: :MMI-RAM 0115 - state 0 mms * *DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function- - - - -MMS 0 0 0 B-U NO REASON 28/06 20:40:54 NoneMMS 0 1 0 B-U NO REASON 28/06 20:40:55 NoneMMS 1 0 0 B-U MMS Providing Clock 28/06 20:43:28 NoneMMS 1 1 0 B-U NO REASON 06/07 13:45:08 NoneMMS 2 0 0 B-U NO REASON 28/06 20:40:53 NoneMMS 2 1 0 B-U NO REASON 28/06 20:40:53 NoneMMS 3 0 0 B-U NO REASON 28/06 20:40:52 NoneMMS 3 1 0 B-U NO REASON 02/07 15:23:01 NoneMMS 4 0 0 B-U NO REASON 28/06 20:40:52 NoneMMS 4 1 0 B-U NO REASON 28/06 20:40:52 NoneMMS 5 0 0 B-U NO REASON 28/06 20:40:51 NoneMMS 5 1 0 B-U NO REASON 28/06 20:40:51 NoneMMS 6 0 0 B-U NO REASON 28/06 20:40:50 NoneMMS 6 1 0 B-U NO REASON 28/06 20:40:51 None.END OF STATUS REPORT8摩托罗拉BSS系统维护OMC(命令)3. 3. 检查所有基站的工作状态检查所有基站的工作状态: :MMI-RAM 0115 - state 0 site * *DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function- - - - -SITE 0 0 0 B-U NO REASON 28/06 20:43:28 NoneSITE 1 0 0 B-U NO REASON 07/07 10:28:13 NoneSITE 3 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 6 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 7 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 8 0 0 B-U NO REASON 07/07 10:28:14 NoneSITE 13 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 16 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 54 0 0 B-U NO REASON 07/07 10:46:17 NoneSITE 55 0 0 B-U NO REASON 07/07 10:28:18 NoneSITE 56 0 0 B-U NO REASON 07/07 10:28:18 NoneSITE 58 0 0 B-U NO REASON 07/07 10:41:44 NoneSITE 62 0 0 B-U NO REASON 07/07 10:28:17 NoneSITE 63 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 75 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 98 0 0 B-U NO REASON 07/07 10:28:18 None END OF STATUS REPORT9摩托罗拉BSS系统维护OMC(命令)4.4.使用该命令可以查看该使用该命令可以查看该BSCBSC的所有的所有LACLAC和和CELL_ID:CELL_ID:MMI-RAM 0115 - disp_bssOPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped NE:Not Equipped S:Shutdown SITE FU STATUS # OF GSM CELL ID FREQ BCCHSITE STATE LOSS OF SECTORS MCC MNC LAC CI TYPE FREQ- - - - - - - 0 B-U CLEAR 0 1 B-U CLEAR 3 Service 460 00 30502 (7726h) 13011 (32D3h) DCS1800 546 Service 460 00 30502 (7726h) 13012 (32D4h) DCS1800 553 Service 460 00 30502 (7726h) 13013 (32D5h) DCS1800 560 3 B-U Redundancy 3 Capacity 460 00 30502 (7726h) 13031 (32E7h) DCS1800 541 Service 460 00 30502 (7726h) 13032 (32E8h) DCS1800 548 Service 460 00 30502 (7726h) 13033 (32E9h) DCS1800 555 6 B-U CLEAR 3 Service 460 00 30502 (7726h) 13061 (3305h) DCS1800 545 Service 460 00 30502 (7726h) 13062 (3306h) DCS1800 552 Service 460 00 30502 (7726h) 13063 (3307h) DCS1800 559 7 B-U CLEAR 3 Service 460 00 30502 (7726h) 13071 (330Fh) DCS1800 544 Service 460 00 30502 (7726h) 13072 (3310h) DCS1800 551 Service 460 00 30502 (7726h) 13073 (3311h) DCS1800 55810摩托罗拉BSS系统维护OMC(命令)5.使用该命令可以显示处理器的工作状态使用该命令可以显示处理器的工作状态: :MMI-RAM 0118 - disp_process 0OPROCESSOR STATUS INFORMATION FOR LOCATION 0:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped NE:Not Equipped Related RelatedCPU# Processor Name State Reason Device Function- - - - - -0113 GPROC 0 0 (LCF 0) B-U NO REASON MTL 0 0 N/A MTL 1 0 N/A0114 GPROC 1 0 (LCF 1) B-U NO REASON MTL 2 0 N/A MTL 3 0 N/A0115 BSP 0 0 B-U NO REASON OML 0 0 N/A OML 1 0 N/A XBL 0 0 N/A0116 GPROC 2 0 (LCF 2) B-U NO REASON MTL 4 0 N/A MTL 5 0 N/A0117 GPROC 3 0 (LCF 3) B-U NO REASON MTL 6 0 N/A MTL 7 0 N/A0118 GPROC 4 0 (LCF 4) B-U NO REASON MTL 8 0 N/A MTL 9 0 N/A0119 BSP 1 0 E-U NO REASON N/A N/A0213 GPROC 5 0 (LCF 5) B-U NO REASON MTL 10 0 N/A0214 GPROC 6 0 (LCF 6) B-U NO REASON N/A N/A0215 GPROC 7 0 (LCF 7) B-U NO REASON SITE 54 0 N/A SITE 56 0 N/A SITE 55 0 N/A SITE 98 0 N/A.END OF STATUS REPORT11摩托罗拉BSS系统维护OMC(命令)6. 6. 查看当前存在的告警查看当前存在的告警: :MMI-RAM 011a - disp_act_alarm 0 There are no active alarms at site 0.命令参数: 站号 0:BSC 或 XCDR 1100: BTS 也可输入需要查询的站号,如查询“柳州局”（1号站），则需MMI-RAM 011a - disp_act_alarm 1即可查询到该站当前存在的告警。7. 7. 查看时钟板状态查看时钟板状态: :MMI-RAM 011a - state 0 gclk *GCLK 0 0 0 B-U GCLK Phase Locked 12/06 10:21:47 NoneGCLK 1 0 0 E-U GCLK Phase Locked 12/06 10:21:47 None12摩托罗拉BSS系统维护OMC(命令)8.查看CIC电路状态:MMI-RAM 0117 - state 0 cic 128 to 144DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:ShutdownNE RESPONSE - -CIC 128 D-NE No reason - 0 时隙, 没有定义,CIC 129 D-NE No reason CIC 130 D-NE No reasonCIC 131 D-NE No reasonCIC 132 D-NE No reasonCIC 133 E-U No reasonCIC 134 E-U No reasonCIC 135 E-U No reasonCIC 136 E-U No reasonCIC 137 E-U No reasonCIC 138 E-U No reasonCIC 139 E-U No reasonCIC 140 E-U No reasonCIC 141 E-U No reasonCIC 142 E-U No reasonCIC 143 E-U No reasonCIC 144 D-NE No reason - 对应XCDR的16 时隙, 没有定义END OF STATUS REPORT13摩托罗拉BSS系统维护OMC(命令)XCDR状态检查命令1.检查2M口的状态: (同BSC);2.检查当前存在的告警:(同BSC);3.查看与BSC间的2M联接关系:MMI-RAM 011a - disp_bss_con The RXCDR to BSS connectivity is as follows : RXCDR MMS id 10 1 is connected to BSS 1 - MMS id 1 0 RXCDR MMS id 8 0 is connected to BSS 1 - MMS id 3 0 RXCDR MMS id 8 1 is connected to BSS 1 - MMS id 5 0 RXCDR MMS id 6 0 is connected to BSS 1 - MMS id 7 0 RXCDR MMS id 30 0 is connected to BSS 1 - MMS id 9 0 RXCDR MMS id 30 1 is connected to BSS 1 - MMS id 11 0 RXCDR MMS id 28 0 is connected to BSS 1 - MMS id 21 0 RXCDR MMS id 28 1 is connected to BSS 1 - MMS id 23 0 Finished displaying RXCDR to BSS connectivity14摩托罗拉BSS系统维护OMC(命令)4.显示XCDR内定义的半固定连接:MMI-RAM 011a - disp_link The CEPT nailed connections are as follows:-Incoming MMS Id: 10 1 Timeslot: 16 Outgoing MMS Id: 24 0 Timeslot: 16Incoming MMS Id: 8 0 Timeslot: 16 Outgoing MMS Id: 20 0 Timeslot: 16Incoming MMS Id: 8 1 Timeslot: 16 Outgoing MMS Id: 16 0 Timeslot: 16Incoming MMS Id: 6 0 Timeslot: 16 Outgoing MMS Id: 12 0 Timeslot: 16Incoming MMS Id: 30 0 Timeslot: 16 Outgoing MMS Id: 44 0 Timeslot: 16Incoming MMS Id: 30 1 Timeslot: 16 Outgoing MMS Id: 40 0 Timeslot: 16Incoming MMS Id: 30 1 Timeslot: 1 Outgoing MMS Id: 38 0 Timeslot: 16Incoming MMS Id: 28 0 Timeslot: 16 Outgoing MMS Id: 36 0 Timeslot: 16Incoming MMS Id: 28 0 Timeslot: 1 Outgoing MMS Id: 34 0 Timeslot: 16Incoming MMS Id: 28 1 Timeslot: 16 Outgoing MMS Id: 32 0 Timeslot: 16Incoming MMS Id: 28 1 Timeslot: 1 Outgoing MMS Id: 29 0 Timeslot: 16Incoming MMS Id: 10 0 Timeslot: 2 Outgoing MMS Id: 10 1 Timeslot: 1Incoming MMS Id: 10 0 Timeslot: 3 Outgoing MMS Id: 26 0 Timeslot: 1Incoming MMS Id: 10 0 Timeslot: 4 Outgoing MMS Id: 26 0 Timeslot: 2Incoming MMS Id: 10 0 Timeslot: 5 Outgoing MMS Id: 26 0 Timeslot: 3Incoming MMS Id: 26 1 Timeslot: 2 Outgoing MMS Id: 8 0 Timeslot: 1 Finished displaying all nailed connections15摩托罗拉BSS系统维护OMC(命令)BTS状态检查命令1.检查当前基站的载频状态:MMI-RAM 0118 - state 54 dri * * DEVICE STATUS INFORMATION FOR LOCATION 54:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function- - - - -DRI 0 0 0 B-U NO REASON 08/07 10:08:57 RTF 0 1 0DRI 0 1 0 B-U NO REASON 08/07 10:08:24 RTF 0 0 0DRI 0 2 0 B-U NO REASON 07/07 10:46:55 RTF 0 2 0DRI 0 3 0 B-U NO REASON 07/07 10:47:08 RTF 0 3 0DRI 1 0 0 B-U NO REASON 07/07 10:46:31 RTF 1 0 0DRI 1 1 0 B-U NO REASON 07/07 10:46:43 RTF 1 1 0DRI 1 2 0 B-U NO REASON 07/07 10:46:55 RTF 1 2 0DRI 1 3 0 B-U NO REASON 07/07 10:47:08 RTF 1 3 0DRI 2 0 0 B-U NO REASON 07/07 10:46:31 RTF 2 0 0DRI 2 1 0 B-U NO REASON 07/07 10:46:43 RTF 2 1 0DRI 2 2 0 B-U NO REASON 07/07 10:46:55 RTF 2 2 0DRI 2 3 0 B-U NO REASON 07/07 10:47:08 RTF 2 3 0 END OF STATUS REPORT 16摩托罗拉BSS系统维护OMC(命令)2.检查基站各小区用户占用情况:MMI-RAM 0118 - disp_cell_s 54Start of report for LOCATION 54:GSM CELL IDMCC 460 460 460MNC 00 00 00LAC 30502 (7726h) 30502 (7726h) 30502 (7726h)CI 13541 (34E5h) 13542 (34E6h) 13543 (34E7h)-Frequency Type DCS1800 DCS1800 DCS1800BCCH Frequency 541 548 555-Status Barred Barred BarredReset in Prog No No NoSPI in Prog No No NoBSS BSSAP Prhb NA NA NAMSC BSSAP Prhb NA NA NASPI/MSC SCCP Prhb NA NA NAAccClass Bar NA NA NAFull Power Mode OFF OFF OFFExt Range Mode OFF OFF OFF FREE INUSE UNAVL FREE INUSE UNAVL FREE INUSE UNAVL - - - - - - - - -SDCCH 16 0 0 16 0 0 16 0 0 TCH/F 29 0 0 29 0 0 29 0 0 End of Report. 17摩托罗拉BSS系统维护OMC(命令)3.显示某载频的信道占用情况:MMI-RAM 0118 - disp_rtf_ch 54 0 0Start of report for RTF 0 0 at location 54: TIMESLOT SUB-CHAN STATE - 0 BCCH BCCH ACTIVE 1 (SDCCH/8) 0 IDLE 1 IDLE 2 IDLE 3 IDLE 4 IDLE 5 IDLE 6 IDLE 7 IDLE 2 (TCH/F) 0 IDLE 3 (TCH/F) 0 IDLE 4 (TCH/F) 0 IDLE 5 (TCH/F) 0 IDLE 6 (TCH/F) 0 IDLE 7 (TCH/F) 0 IDLE End of Report. 18摩托罗拉BSS系统维护OMC(命令)4.查看当前基站的站号:MMI-RAM 0115 - disp_siteCurrent site number is 0* 该命令可在BTS基站上执行,借以检查数据库是否下载正确.5.查看小区参数:MMI-RAM 0118 - disp_cell 4 6 0 0 0 30502 13541 ( MCC MNC LAC Cell_id ) frequency_type = DCS1800 4 bsic = 36 max_tx_bts = 21 max_tx_ms = 30. cell_reselect_hysteresis = 3 cell_reselect_param_ind = 1 cell_bar_qualify = 1 cell_reselect_offset = 3 temporary_offset = 0 penalty_time = 119摩托罗拉BSS系统维护OMC(命令)三.配置查看命令BSC /XCDR配置查看命令BTS 配置查看命令20摩托罗拉BSS系统维护OMC(命令)BSC/XCDR配置查看命令1.查看MMS 2M口的各时隙配置:MMI-RAM 0213 - disp_mms_ts_us 0 0 1Start of Report: Site: 0 MMS: 0 1General Timeslot Usage:TS Usage Device ID Type Site CIC Group CIC State TS Group RTF Site RTF TS0 UNAVAILABLE1 RSL 0 0 0 64K 32 UNUSED.19 UNUSED20 RTF 2 1 0 FULL 321 RTF 2 1 0 FULL 322 RTF 1 1 0 FULL 3.29 RTF 1 0 0 FULL 330 RTF 0 0 0 FULL 331 RTF 0 0 0 FULL 3End of Report.21摩托罗拉BSS系统维护OMC(命令)2.查看C7信令MTL的配置时隙:MMI-RAM 0213 - disp_eq 0 mtl 0 0 Device identification for this MTL: 0 First MMS identifier for this device: 1 Second MMS identifier for this device: 0 Timeslot on MMS where this device appears: 163.查看某基站与BSC的A-bis接口路径:MMI-RAM 0213 - disp_eq 0 path 54 0 Terminating SITE id is: 54 The Unique PATH Identifier is: 0 BSC MMS identifiers: 8 0 - BSC的E1接口编号 SITE identifier: 54 Upstream MMS identifiers: 0 0 - BTS的NIU板第1个2M口 22摩托罗拉BSS系统维护OMC(命令)4.查看BSC的OPC和DPC* OPC ( 源信令点编码) DPC ( 目的信令点编码 ) OPC & DPC 必需与MSC侧对应.MMI-RAM 0213 - disp_element opc 012620MMI-RAM 0213 - disp_element opc 0 1261923摩托罗拉BSS系统维护OMC(命令)BTS配置查看命令1.查看基站的载频配置信息:MMI-RAM 0213 - disp_eq 54 dri 0 2 DRI identifier: 0 2 Cabinet identifier: 0 Type of connection to the BTP: MASTER Port to which the carrier is connected: 2 机柜内右起第3个 RTF identifier: GSM cell ID where the DRI appears: 460 00 30502 13541 - (所在小区号) Antenna select number for this cell: 2 -天线号(SURF板 1A & 1B) COMB id: Cavity number for this COMB: The diversity flag for this DRI is: 1 The fm cell type is: 4 24摩托罗拉BSS系统维护OMC(命令)2.查看RTF频点配置:*RTF(Receive Transmit Function) MMI-RAM 0118 - disp_eq 54 rtf 0 0 Type of carrier: BCCH - 是否BCCH RTF identifier: 0 0 Primary Unique PATH id is: 0 GSM cell to which this carrier is assigned: 460 00 30502 13541 Carrier absolute radio freq. channel: 541 - ( 频点 ) Carrier frequency hopping indicators: 255 255 255 255 255 255 255 255 Carrier training sequence codes: 4 4 4 4 4 4 4 4 SDCCH load: 2 SDCCH placement priority: 0 Channel allocation priority: 0 25摩托罗拉BSS系统维护OMC(命令)3.查看某小区的所有相邻小区:MMI-RAM 0118 - disp_neighbor 4 6 0 0 0 30502 13541 Start of neighbor report: GSM CELL ID BA BA FREQ BCCHMCC MNC LAC CI LOC SYNC SACCH BCCH TYPE FREQ BSIC- - - - - - - -460 00 30502 (7726h) 13012 (32D4h) INT NO YES YES DCS1800 553 32460 00 30502 (7726h) 13133 (334Dh) INT NO YES YES DCS1800 558 33460 00 30502 (7726h) 13132 (334Ch) INT NO YES YES DCS1800 551 33460 00 30502 (7726h) 13561 (34F9h) INT NO YES YES DCS1800 545 34460 00 30498 (7722h) 13011 (32D3h) EXT N/A YES YES PGSM 35 32460 00 30498 (7722h) 13563 (34FBh) EXT N/A YES YES PGSM 29 38460 00 30498 (7722h) 13131 (334Bh) EXT N/A YES YES PGSM 26 38460 00 30483 (7713h) 13123 (3343h) EXT N/A YES YES PGSM 40 37460 00 30503 (7727h) 13121 (3341h) EXT N/A YES YES DCS1800 542 32460 00 30502 (7726h) 13542 (34E6h) INT NO YES YES DCS1800 548 36460 00 30498 (7722h) 13541 (34E5h) EXT N/A YES YES PGSM 34 34460 00 30498 (7722h) 13542 (34E6h) EXT N/A YES YES PGSM 25 34460 00 30498 (7722h) 13543 (34E7h) EXT N/A YES YES PGSM 28 34460 00 30502 (7726h) 13543 (34E7h) INT NO YES YES DCS1800 555 36 End of report26摩托罗拉BSS系统维护OMC(命令)4.查看相邻小区的参数配置:MMI-RAM 0118 - disp_neighbor 4 6 0 0 0 30502 13541 4 6 0 0 0 30502 13561 ( 源小区 ) (目标小区)Start of neighbor report: Neighbor cell id: 460 00 30502 (7726h) 13561 (34F9h)Neighbor cell name: No Name DefinedNeighbor cell frequency type: DCS1800Placement: InternalSynchronization enabled: 0 (no)Frequency in the ba_sacch list: 1 (yes)Frequency in the ba_bcch list: 1 (yes)BCCH frequency number: 545 - 目标小区BCCHBase station identity code: 34 - 目标小区BSICMS transmit power maximum: 30Neighbor receive level minimum: 15Neighbor handover margin: 8Power budget surrounding cell hreqave: 4Receive quality handover margin: -63Receive level handover margin: -63Neighbor type 5 handover margin: 63Adjacent channel interference test enabled: 0 (no)Power budget algorithm type: 1Neighbor congestion handover margin: 0 End of report27摩托罗拉BSS系统维护OMC(命令)5.查看指定的小区的指定小区参数:1) 查看 max_tx_bts 小区的功率发射偏移量 disp_ele max_tx_bts 54 cell_number=4 6 0 0 0 30502 135412) 查看 max_tx_bts 小区的CRO: disp_ele cell_reselect_offset 54 cell_number=4 6 0 0 0 30502 135416.查看BTS的所有设备配置: MMI-RAM 0113 - disp_eq 15 CSFP 0 0 0 BTP 0 0 0 BTP 1 0 0 DRI 0 0 0 DRI 0 1 0 DRI 0 2 0 DRI 1 0 0 DRI 1 1 0 DRI 1 2 0.28摩托罗拉BSS系统维护OMC(命令)四. BSS操作命令BSS操作命令设备安装命令设备删除命令29摩托罗拉BSS系统维护OMC(命令)BSC操作命令1.ins_device 命令功能: Brings a device into service by locking and then unlocking the device. 格式: ins_device locationlocation Specifies the location of the device:0 or bsc : Base Station Controller (BSC) 1 to 100 : Base Transceiver Station (BTS) device_namedevice_name Literal that uniquely identifies the device. device_id1device_id1 First device identifier. This definition varies with each device.device_id2device_id2 Second device identifier. This definition varies with each device.device_id3device_id3 Third device identifier. This definition varies with each device.举例: 激活BSC的E1接口:MMS 1 0ins_device 0 mms 1 0 30摩托罗拉BSS系统维护OMC(命令)2.lock_device命令:功能: locks a specified device from further use. 格式: lock_device 参数解释同ins_device.举例: 锁住54号站的载频 : DRI 0 1 lock 54 dri 0 13.unlock_device命令:功能: unlocks a specified device from further use. 格式: unlock_device 参数解释同ins_device.举例: 解锁54号站的载频 : DRI 0 1 unlock 54 dri 0 131摩托罗拉BSS系统维护OMC(命令)4.改变参数值: chg_element1) 改变所有BTS小区的发射功率（最大发射） chg_ele max_tx_bts 0 all all 0 :max_tx_bts 参数值, 表示发射功率的降低偏移量. 每一步长代表2dB。 范围:0 21. 即此参数为0时以最大功率发射, 为21时降低42dB发射。 第一个all：站号，在此指所有基站。 第二个all：小区号，在此指基站所有（3个）小区。2) 改变54号站3个小区的发射功率至最小： chg_ele max_tx_bts 21 54 all3) 改变54号站第1小区的发射功率至最小： chg_ele max_tx_bts 21 54 cell_number=4 6 0 0 0 30502 13541* 可用此命令修改的参数有：cell_reselect_offset, rxlev_access_min cell_bar_access_switch, cell_bar_qualify, bts_power_control_allowed, 等等可在disp_cell输出结果中 显示出的参数。32摩托罗拉BSS系统维护OMC(命令)设备安装命令1. Equip:功能： adds a device or function to the Fault Management (FM) portion of the Configuration Management (CM) database. 1) 配置CIC电路:MMI-SYS 0115 - equip bsc MTLEnter the device identification for this MTL: 0Enter the first MMS identifier for this device: 16Enter the second MMS identifier for this device: 0Enter the timeslot on MMS where this device appears: 16COMMAND ACCEPTED2) 配置MSI板:MMI-SYS 0115 - equip bsc MSIEnter the MSI identifier: 17Enter the cage number: 0Enter the slot number: 17Enter the MSI type: 0 COMMAND ACCEPTED33摩托罗拉BSS系统维护OMC(命令)2.add_neighbor1)增加BSC外部的相邻小区: add_nei 4 6 0 0 0 21600 21 4 6 0 0 0 21344 21 external Enter the neighbor cell frequency type: 1 -( PGSM ) Enter the BCCH frequency number: 92 Enter base station identity code (bsic) 46 -( DEC ) Enter MS transmit power maximum: 33 ( 2W ) Enter neighbor receive level minimum: 10 ( -100dBm) Enter neighbor handover margin: 5 Enter the power budget surrounding cell hreqave: 8 Enable adjacent channel interference avoidance test? Enter the power budget algorithm type: 3 Enter the uplink receive level threshold of the serving cell: 20 Enter the downlink receive level threshold of the serving cell: Enter neighbor congestion handover margin: 534摩托罗拉BSS系统维护OMC(命令)2) 增加BTS内部的相邻小区: add_nei 4 6 0 0 0 21600 11 4 6 0 0 0 21600 12 internalEnable synchronization: yesEnter neighbor receive level minimum: 15 Enter neighbor handover margin: 6Enter the power budget surrounding cell hreqave: 6Enable adjacent channel interference avoidance test? noEnter the power budget algorithm type: 1Enter neighbor congestion handover margin: 0COMMAND ACCEPTED35摩托罗拉BSS系统维护OMC(命令)设备删除类命令1.unequip: 功能：deletes a device or function from the Fault Management (FM) portion of the Configuration Management (CM) database. 1） 删除CIC电路 unequip 0 cic 252） 删除54号站BTS载频DRI 0 1 unequip 54 dri 0 1* 前提为该CIC电路或载频（dri 0 1 ） 处于LOCK状态。36摩托罗拉BSS系统维护OMC(命令)2. del_neighbor: 删除相邻小区功能: Deletes neighbour cells from a cell neighbour list. If two cell IDs are entered, the second cell ID is removed from the first cell neighbour list. 1)删除小区 4 6 0 0 0 30502 13541 的相邻小区 4 6 0 0 0 30502 13011: del_nei 4 6 0 0 0 30502 13541 4 6 0 0 0 30502 130112)删除小区 4 6 0 0 0 30502 13541 的所有相邻小区: del_nei 4 6 0 0 0 30502 13541 all3) 删除小区 以4 6 0 0 0 30502 13541 为相邻小区的所有相邻关系: del_nei all 4 6 0 0 0 30502 13541 37摩托罗拉BSS系统维护OMC(命令)五.OMC-R统计功能介绍2001年GSM标准性能统计项介绍计算公式报告提取过程38摩托罗拉BSS系统维护OMC(命令)统计项介绍1. SDCCH 统计项统计项:D231 忙时SDCCH可用总数D232 忙时SDCCH试呼总次数D233 忙时SDCC溢出总次数D234 忙时SDCCH掉话总次数 D235 忙时SDCCH总话务量 39摩托罗拉BSS系统维护OMC(命令)2. TCH 统计项统计项:D236 忙时话音信道可用总数D237 忙时话音信道试呼总次数(不含切换)D238 忙时话音信道溢出总次数(不含切换)D239 忙时话音信道试呼总次数(含切换)D240 忙时话音信道溢出总次数(含切换)D241 忙时话音信道占用总次数 D242 忙时话音信道掉话总次数D243 忙时话音信道总话务量D244 忙时切换请求总次数D245 忙时切换成功总次数D246 忙时双频切换试呼总次数 D247 忙时双频切换成功总次数D248 GSM1800系统忙时话音信道总话务量40摩托罗拉BSS系统维护OMC(命令)统计指标计算公式1.SDCCH拥塞率= D233/D2322.SDCCH掉话率= D234/(D232-D233)3.SDCCH话务量= 各小区D235总和. 或=D235(BSS level)*服务小区总数.4.TCH拥塞率(含切换)=D240/D2395.TCH拥塞率(不含切换)=D238/D23741摩托罗拉BSS系统维护OMC(命令)7. TCH掉话率 = D242/D241;8. TCH话务量 = 各小区D243总和. 或=D243(BSS level)*服务小区总数.9. 切换成功率=D245/D24410.呼叫建立成功率= D241/D23711.话务掉话比= TCH_Traffic * 60/D24242摩托罗拉BSS系统维护OMC(命令)报告生成过程一. 统计项的选择二. 采集范围的选择三. 报告格式的设置四. 报告的提取* 以上需在OMC-R现场操作演示43摩托罗拉BSS系统维护OMC(命令)OMC-R图型用户界面（GUI）44摩托罗拉BSS系统维护OMC(命令)上图中5所指的图标为Performance management。操作步骤：1.点击该图标，等待PM窗口弹出； 45摩托罗拉BSS系统维护OMC(命令)2.点击Selections,出现以下窗口 46摩托罗拉BSS系统维护OMC(命令) 47摩托罗拉BSS系统维护OMC(命令)3.设置统计项及统计范围,(以下是统计级别分类) 同时可选择报告的输出方式.48摩托罗拉BSS系统维护OMC(命令)以下为输出到屏幕的报告格式:若输出到文件(file):则结果存在以下目录中:usr/gsm/ne_data/pm_reports/delimited/可用软盘或网线拷出。49摩托罗拉BSS系统维护OMC(命令)六. 日常维护检查事项1.每日检查系统工作状态:命令:disp_act_alarm # disp_act_alarm # 注:如果有这样的告警可以根据MOTOTROLA的用户手册解决,不能解决的,立即通知MCSC.命令:disp_process 0 disp_process 0 注:每块GPROC的状态都应该是B-U 或E-U,如果状态D-U必须找出原因。可以采用命令 ins 0 ins 0 GPROC #GPROC # 来激活该GPROC板。命令:statestate 0 MTL * * 0 MTL * * 注:每一条MTL都应为B-U状态, 如果是D-U mms no in service，检查相应的传输,如果是E-U,向MSC侧检查。 可以采用命令 ins 0 MTL #ins 0 MTL # 来激活该MTL。命令:statestate 0 MMS * * 0 MMS * * 注: 不应该有新的传输问题出现,如果出现通知传输部门解决.50摩托罗拉BSS系统维护OMC(命令)命令:statestate 0 MSI * *;state 0 KSW * *;state 0 LAN * * 0 MSI * *;state 0 KSW * *;state 0 LAN * *；state 0 TBUS * *;state 0 PBUS * *;state 0 CBUS * state 0 TBUS * *;state 0 PBUS * *;state 0 CBUS * *;state 0 SBUS * *;state 0 SBUS * *。 注: 所有的设备都应该是B-U或E-U状态,否则需要按照用户手册处理或者通知MCSC.命令:statestate 0 GCLK * * 0 GCLK * * 注: 主备用的GCLK应该是B-U GCLK phase locked和E-U GCLK phase locked,如果是D-U则GCLK坏了,如果是B-U phase lock failure 说明GCLK好的,但时钟失锁,需要重调时钟。可以先在BSC上用MMI命令尝试重锁时钟，命令是： reattampt 0 #reattampt 0 #。命令:statestate 0 RSL * * 0 RSL * *；state 0 PATH * *;state 0 SITE * state 0 PATH * *;state 0 SITE * *. *. 注: 所有的RSL,PATH,SITE都应该是B-U, 如果不是,请检查后面的原因部分并通知基站维护部门。命令:state # DRI * *state # DRI * *； 注: 所有载频状态必须是B-U或者E-U,如果该载频状态既不是B-U也不是E-U，参考用户手册使该载频处于正常状态或者通知基站维护部门。可以用人机命令激活该载频。 命令是： ins # dri $ $ins # dri $ $。51摩托罗拉BSS系统维护OMC(命令)命令:disp_cell_s #disp_cell_s #； 注: 基站内的所有小区应该是UNBARRED状态,观察是否有SDCCH和TCH被占用,如果长时间没有SDCCH或TCH被占用,有可能该小区有故障,需要通知基站维护部门检查基站情况.如果小区内OOS的TCH数量不为0,则按照以下步骤进行.1. disp_rtf_ch # $ $, 找出含有OOS的TCH的载频; 2. loc # pchn $ $ ;unloc # pchn $ $ 3.在步骤2无效时 ，ins # DRI $ $。 注: 当DCS1800禁止手机空闲模式下接入时,小区状态为BARRED.2.每周的日常维护工作 利用performance statstic，收集一周的性能统计数据， 有针对性的分析统计报告。提交维护人员作为优化依据。52摩托罗拉BSS系统维护OMC(命令)3.每月一次的维护工作驱车测试，由移动移动和摩托罗拉公司共同分析结果；检查时间(与北京时间误差小于5秒)数据库备份：在OMC-R上使用UPLOAD操作对所有数据库做备份。4.每半年一次的维护工作使用时钟计对所有的GCLK时钟做16.387MHz的重新矫正. 53摩托罗拉BSS系统维护OMC(命令)